Finden Sie schnell selbstschneidende edelstahlschrauben für aluminium für Ihr Unternehmen: 7 Ergebnisse

Typ MITSF The MITSF machine is designed to identify and print progressive and multifocal semi-finished lenses. The PPOS system, integrated in the unit, detects the μ-engravings or the upper segment line and identifies the semi-finished by reading the identification code (check of product code, Addition, base, eye, logo at the edge or under the μ-engravings) by Optical Character Recognition. The inspected lenses are then inked by a robot, permitting a large flexibility in image choice (10 plates – 20 images). The data of this machine can be transmitted to the automatic packaging unit (MESF), eliminating any product mispack.

Typ MCVES The Control & Packaging Unit for Stock Lenses is best utilized by large volume single vision lens manufacturers. This machine will inspect and pack 900 lenses per hour with such accuracy that there are no errors such as sending out of tolerance lenses out or rejecting in tolerance lenses. In addition, the automatic cycle prevents any mispackaging of product. The zero-defect packaging and the labour costs savings proven by installation of over 100 of these machines worldwide justify the investment in this machine.

FOCOVISION SPF-3 The FocovisionTM by Transmission SPF-3 is used in optical laboratories where the lenses are mounted into frames. It is connected to the computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, and easy calibration. It performs a lens optical power measurement compliant with ISO/ANSI Standards by using a light beam according to ‘IOA’ (Infinity On Axis) configuration at a certain wavelength (546 nm or 587nm) and by measuring in all directions (360 degrees – “ring method”). In addition, it’s equipped with a frame positioning device and has a user-friendly interface, permitting an operator to learn how to perform the complete lens control of the mounted lenses with little training required.

Type MSEVP The Dispatch Packaging Unit for Prescription Lenses is a large scale production machine which gathers both prescription lens envelopes (right and left), a delivery note, ID card, and cleaning clothe along with other accessories; and places them into a larger dispatch envelope. Optional is the automatic sorting between different destinations to reduce and optimize shipping times and costs, while the completely automatic packaging prevents any mispackaging. With the capacity of the machine up to 300 jobs per hour (depending on the materials loaded), the machine can be installed behind the Automatic Packaging Unit for Prescription Lenses.

Type MEVP2 The AutoPacker is designed for use in mid to large volume prescription laboratories. After the job-identification, the lenses are unloaded from the job tray and centered. An envelope type is chosen from the magazine out of eighteen different envelope types, the lens is inserted in the envelope, and a label is printed and applied to the flap of the envelope which seals the envelope shut. Before loading the packaged lens into its original job tray a check is made to ensure the envelope is not empty.The machine is also capable of packing cut lenses. The 600 lenses per hour capacity and the completely automatic cycle which avoids any mispackaging, coupled with our years of experience in the field of packaging RX glasses are proof of its value. This machine is best utilized after the Automatic Control and Inking Unit.

Typ Focovision SPV-3 The FocovisionTM by Transmission SPV-3 is used in prescription laboratories. It is connected to your computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, easy calibration, and especially its visualization system of the semi visible marks or the upper segment line corner of the addition. This system permits an accurate positioning on the different control points without any lens marking. It performs an accurate lens optical power measurement compliant with ISO/ANSI Standards by using a light beam perpendicular to the concave lens surface (‘FOA’ - Focus On Axis configuration) at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees - "ring" method). In addition, it has a user-friendly interface permitting an operator to learn how to perform the complete lens control (far view, prism reference point, near view, thickness, shape, etc.) with little training required).

Typ MCVP4 The Dual LensMapper, integrated in this unit, gives a mapping of the prescription lens (freeform or conventional) and calculates FOA optical power at the reference points (FV, NV). For the freeforms, it compares the expected design to the real lens and displays an Error Map. A Go/NoGo decision is made, based on the error map and the list of criteria defined by the lab. Because the A&R AutoMapper is task specific, and the system has a small footprint, you can easily integrate it into the lab, either directly after the surfacing or in the final control (also suitable for checking the cut lenses). The AutoMapper is an excellent investment for a modern lab with a rapid payback!